5 HOMEDEPOT.COM/GLACIERBAY
SILI
1
2
1
1
2
3
Insert 2
H
G
O
M
N
L
Insert 1
1
1
D
E
F
G
Installation (continued)
Installing the drain body
Apply silicone sealant (not included) under the drain
flange (D) and place the drain flange (D) over the
drain hole in the sink.
From underneath the sink, screw the drain body (G)
onto the drain flange (D). Ensure that the opening (1)
for the ball rod on the drain body (G) faces towards
the rear of the sink.
Tighten the rubber washer (E) and lock nut (F) on the
drain body (G).
3
Installing the stopper and ball rod
Insert the pop up stopper (H) into the drain hole in
the sink.
Remove the spring clip (L) from the ball rod (M).
Secure the bushing (N) and ball nut (0) against the
hole in the drain body (G) and tighten the ball nut (O)
onto the threaded end. Do not overtighten.
4
Remove the ball nut (O). Insert the ball rod (M) into
the drain body (G) and through the hole of the pop up
stopper (H). See insert 1.
For easier removal and cleaning, rotate the pop up
stopper (H) 90 degrees so that the ball rod (M) does
not go through the hole in the pop up stopper (H).
See insert 2.
NOTE:
In shallow cabinet installations, the ball rod (M)
may need to be shortened. Use a hack saw to cut the
end of the rod, away from the ball, to the desired length.
