7 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation (continued)
7
Connecting the 1 in. tube
□
Fasten the 1 in. diameter tube (A) to the 1 in. mounting
bracket (D) using end cap screws (BB) and threaded
inserts (CC), and tighten with the large hex wrenches (GG).
□
To level the rod assembly, tighten the pre-installed set
screws on mounting bracket (D) with the medium hex
wrench (HH).
6
Connecting the tubes
□
Insert the plastic ring (AA) into the end of the
1 in. diameter tube (A).
□
Insert the end of the 7/8 in. tube (B) into the end of the 1 in.
diameter tube (A).
5
Inserting the tube plugs
□
Line up the cut-outs in the tube plugs (F, G) with top and
bottom holes.
□
Insert the 1 in. tube plug (F) into the 1 in. diameter tube (A).
□
Repeat this step using the 7/8 in. tube plug (G) and
7/8 in. diameter tube (B).
nOTe:
This step may be easier if you insert a threaded
insert (CC) through the holes (only to be used as a guide)
before pushing the tube plug (F, G) into place. After
inserting the tube plug (F, G), be sure to remove the
threaded insert (CC).
AA
A
B
CC
BB
A
D
CC
A and B
F and G
pre-installed set screws
