19
Installation
1
CAUTION:
Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply.
2
Preparing for installation
Installing the faucet assembly
NOTE:
This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 3.
A
B
C
D
E
F
□
Before installation, remove the quick connector
(F) from the free end of the hose by unscrewing
it in a counterclockwise direction.
□
Unscrew the nut (D), and remove the
washers (B & C).
NOTE:
If installing the faucet assembly (A) without the
escutcheon, begin with step 2. If installing the faucet
assembly (A) with the escutcheon, begin with step 3.
□
Before installation, ensure that the flange (G)
is placed on the bottom of the new faucet
assembly (A).
□
Insert the faucet body through the hole in the
sink.
□
Retract the hose (1) up through the faucet body
until the hose fitting is flush with the bottom of
shank (2). Do not pull the hose fitting past the
shank.
NOTE:
Do not feed the hose (1) back down through the
spout until step 6.
A
2
1
G
