HOMEDEPOT.COM/GLACIERBAY
Póngase en contacto con 1-855-HDGLACIER para obtener más asistencia.
8
Instalación por abajo
Preparando la encimera
Preparando el gabinete
Coloque la plantilla (provista con el fregadero) en la parte inferior de la
encimera, alineada hacia el frente y centrada; asegurar con cinta.
Trace la plantilla y retírela. Coloque en seco el fregadero para verificar las
medidas.
Siguiendo las instrucciones del fabricante de la encimera, corte con
cuidado la encimera en la línea trazada.
Construya un marco de soporte que encaje dentro de la abertura del
gabinete. Deje un espacio adecuado para el grifo, las líneas de suministro
de agua, el conjunto de desagüe, el triturador de basura y las partes
estructurales del gabinete.
Aplique cinta de pintor a los gabinetes para marcar y cortar. Esto protegerá
el gabinete de daños al cortar.
Delinee el corte en la parte frontal del gabinete de acuerdo con el fregadero
real.
Con una hoja de sierra afilada, corte con cuidado el gabinete en la línea
trazada
Nota:
se recomienda encarecidamente que se comunique con un
fabricante de encimeras profesional cuando instale el fregadero como
encimera.
Nota: el gabinete debe instalarse, asegurarse, aplomarse y nivelarse antes
de instalar el fregadero.
Nota: se recomienda proporcionar al ebanista el fregadero real antes de la
fabricación del armario. Antes de instalar el fregadero, verifique que la
distancia desde la parte superior de las puertas hasta la parte superior del
gabinete sea mayor que el frente de la plataforma..
Nota: verifique dos veces la medida del corte del gabinete y haga los
ajustes necesarios agregando tiras de relleno o lijando la abertura.
Nota: se requiere un gabinete de base de fregadero personalizado y un
marco de soporte para una instalación adecuada.
Contorno para
delantal recortado