HOMEDEPOT.COM
/HOMEDEPOT.CA/GLACIERBAY
Please contact 1-855-434-5224 for further assistance.
6
Positioning for mirror
1
□
Measure the distance between the centers of the
hangers on the back of the mirror. Use a level to
mark these two points on the wall.
2
□
Gypsum wallboard or concrete walls: Drill pilot holes
in the marked locations with a ø 8 mm / 5/16 in
drill bit. Insert the wall anchors (B) using a rubber
mallet until the wall anchors are flush with the
wall.
□
Solid wood walls: Drill pilot holes in the marked
locations with a ø 2 mm / 1/16 in drill bit. Wall
anchors are not necessary.
CAUTION:
Wear a pair of rubber gloves to protect your
hands.
Drilling holes
NOTE:
This mirror can be hanged by two directions.
LEVEL
Assembly (Option#1)
30” [762]
B
