Page 7
GS-CHR-T5
1 and 2-way LED Remote Starter
Programming
Programming Options Continued
Options in BOLD RED are default settings.
Functions
Push To Start
Configuration
Auxilliary 1 Output
(AUX-LOCK)
Hybrid Mode
Auxilliary 1 Output
(AUX-UNLOCK)
Not Supported
Alarm Duration
Mode 1
Button 1
Disabled
Sliding Doors
Data Link Only
Gas/Diesel Vehicle
30 Seconds
Valet Code
Not Supported
Mode 2
Button 2
Application 1
Mode 3
Button 3
Application 2, Turn OFF the
engine when the door is
open. See www.ifar.ca for
the installation guide
Hybrid Vehicle
60 Seconds
120 Seconds
Ignition ON, Valet
button x3 times
Mode 4
Button 4
Mode 5
Button 1 & 2
Ignition ON, Valet button x3
times and x1 time 3 seconds
36
35
34
33
32
31
30
29
28
27
26
25
24
37
Application 3, Turn OFF the
engine when the foot brake
is pressed
Sliding Doors
Data Link Only
Ignition ON, Valet button x4
times and x1 time 3 seconds
Ignition ON, Valet button x5
times and x1 time 3 seconds
Ignition ON, Valet button x6
times and x1 time 3 seconds
Ignition ON, Valet button x7
times and x1 time 3 seconds
Ground Out
Shut down 1 second after
remote start runtime
Shut down 3 seconds after
remote start runtime
Manual Transmission
Ready Mode Activation
Activated by the remote
starter remote
Automatically activated
by hand brake and foot
brake(ON). Not functional
on tachless. Tach must be
connected
Trunk Output
Pulse 0.5 seconds
Pulse 2.5 seconds
Unlock before trunk pulse
0.5 sec
Door unlock Special
Application
No Special Application
Activate vehicle ignition
at Unlock
Activate vehicle ignition and
accessory at Unlock
Valet Mode
Configuration
By remote: Lock &
Unlock or valet button
By remote: AUX-Lock &
Unlock or valet button
By valet button only
Security Configuration
No Special Application
Security ON: Shutdown
Engine if the door is opened
before Unlock is pressed.
(Door trigger required)
Mode 6
Button 3 & 4
