Installation Instruction
- 4 -
6. Connect Door Lock component to Release Lever as
ⓐ
using M6X10 Screw.
7. How to Connect MCCB and COM
Maintain Handle of GCB800 or GCB1200 on ON status and tighten it to COM using 10-24UNC(4ea) Screw.
There are 2 Handle Holders in the plastic bag that must be connected to COM as
ⓐ
. The upper part must match with Bail Arm and the lower
part must stick out 0.32inch(8mm). After attaching, connect M5X10(4ea) according to designated torque.
0.32inch(8mm)
M6X10, Screw
Door lock
10-24UNC, Screw
M5X10, Screw