The earbuds will only be charged when you place them in the charging slots correctly.(You can charge the
charging case and the earbuds at the same time, or you can charge the charging case first and then the earbuds.
The earbuds will only be charged when you correctly place them in the charging slots and close the lid.(You
can charge the charging case and the earbuds at the same time, or you can charge the charging case first and
then the earbuds.
When the left/right single earphone is put into the charging box and the lid is closed, the indicator light flashes
once; two earphones are put into the charging box and the lid is closed at the same time, the indicator light
flashes twice, and then stays on and the earphones are charged.
When the earbuds are fully charged, the indicator light of the charging case turns off and enters the standby
state.
Case Charging
Charging: the indicator light flashes
When fully charged: the indicator light stops flashing, the indicator light is always on, and the indicator light
goes out after unplugging the charging cable
Clear pairing (factory reset) steps
1. Put the earphones into the charging case and open the charging case cover;
2. Press and hold the reset button of the charging case, after the indicator light of the charging case flashes
continuously for 5 seconds, the reset is successful
Charging Alerts
After using it for a long period of time, due to the oxidation of the magnet connector, the earbuds might not
be charged or even turned on. You can fix this problem by cleaning the magnet connectors on the earbuds and
charging case with an alcohol wipe
Put the earbuds in the charging case, the earbuds will turn off immediately and the charging case will start to
charging automatically. The earbuds will connect the last paired mobile automatically.
Storage and Maintenance
If the earbuds have not been used for more than 3 months, we recommend that you charge it.
Please use an charger approved by FCC (Federal Communications Commission).
