Using Bungee Cord to Secure Sack in Solid Liner (Solid Liner Model)
26.
27.
28.
Remove the bungee cord
from around the liner by
pulling up and over.
Place the sack inside the
liner ensuring that the sack
overhangs the liner rim.
Pull the bungee cord over
the sack so that it sits
underneath the rim of the
liner.
4.
NEXUS
®
SHUTTLE BIN
Operator Instruction Leafl et
Attaching A4 Sign Kit
Remove solid liner from bin, if applicable. Position the sign
carrier at the rear of the bin so that the holes are aligned
with the holes in the bin. From inside the bin place 4 off
screws and washers provided through the holes and fi x on
the back of the bin with 4 off washers and nyloc nuts.
Using a 10mm spanner and allen key tighten nuts until
secure.
Place A4 sign behind
the clear polycarbonate
sheet and slide into the
sign carrier so that the
lugs locate into the slots
along the bottom of the
sign carrier.
Inserting A4 Sign
29.
30.
Glasdon U.K. Limited
Preston New Road
BLACKPOOL
Lancashire FY4 4UL
Tel: 01253 600410
Fax: 01253 792558
email: sales@glasdon-uk.co.uk
web: www.glasdon.com
AND
NEXUS SHUTTLE BIN
ARE TRADEMARKS OF GLASDON GROUP
OR ITS SUBSIDIARIES IN THE U.K. AND OTHER COUNTRIES
• A planned maintenance schedule of regular inspection is recommended, replacing
components as necessary.
• Replacement components are available direct from GLASDON UK LIMITED.
• GLASDON UK LIMITED cannot be held responsible for claims arising from incorrect
installation, unauthorised modifications or misuse of the product.
Issue 2
January 2014 C000/0427
© Copyright January 2014
Glasdon UK Ltd reserve the right to alter specifications without prior notice.
R
