English
26/100
6.1. LIST OF MATERIALS
This machine includes the following elements that you
will find inside the box:
• Grass Comber
• Catcher
• Top handle
• Intermediate handle
• Lower handle
• Lower handle screws
• Handle screw and knob
• Hook for cable
• Instruction manual
Remove carefully all the elements from the box and
make sure that all listed parts are included.
Due to the quality controls done at the factory it is
highly improbable that your machine has any faulty
part or that any elements are missing. If you find any
damaged part or there are any elements missing,
do not use the machine until the problem has been
solved or you have been given the missing parts.
Usage of the machine with defective or missing parts
is dangerous and could result in personal injuries.
6.2. MOUNTING THE HANDLE
The handle comes unmounted from the manufacturing
plant. To mount the handle:
1. Place the comber on a flat surface.
2. Insert the lower handles on the
grass comber as shown in the figure and
hold in place with the screws.
3. Place the intermediate handle on the lower handle
and hold in place with the screws and knob
provided.
4. Place the top handle and
hold the screws and
knobs provided.
6.3 INSTALLATION OF THE CATCHER
Place the catcher on the comber by hooking the
catcher on the hooks on the rear part of the machine.
To do this, hold the catcher by the top handle provided
with your right hand, lift the security trap with your left
hand up to its maximum point and hook the catcher
on the machine.
6. START UP INSTRUCTIONS
2
3
1
Summary of Contents for Garland Roll & Combo 502 E
Page 100: ......
