GLD Products
Trueshot Billiard Table
Item 64-6035
8
1-800-225-7593
www.gldproducts.com
3. Swing one of the leg support brackets up. When the hole on the support bracket lines
up with the threaded hole in the outside of the leg, insert the bolt (#2) and tighten.
4. Repeat step 3 on the other side of the leg.
5. Repeat step 3 and 4 on the second leg.
Step 5
2
2
Step 4
Step 3
TO TURN THE TABLE OVER
The base assembly is ready to be turned over.
USE AT LEAST TWO PEOPLE TO LIFT THE BASE ASSEMBLY AND TURN IT OVER TO
REST ON THE LEGS.
DO NOT ROLL THE TABLE OVER.
This will place a sideways force on the legs. The legs
should be off the ! oor until the base assembly is rotated completely. Set the base assembly
down.
