GLD Products
Trueshot Billiard Table
Item 64-6035
9
1-800-225-7593
www.gldproducts.com
TO CLOSE THE TABLE
1. Remove everything from the top of the table.
2. Turn the table over.
3. Remove the leg brace bolts (#2). Swing the leg braces toward the table center and
down.
4. Swing the legs down into the frame of the table.
5. Repeat for the second leg set.
TO LEVEL THE TABLE
Use a carpenters level to adjust the legs as needed until the table is level. The table should
be set-up on a level surface. If the surface is slightly uneven the legs and casters can each
be adjusted about 3/8 inch. The leg adjusters are screwed in or out.
CARE AND USE OF YOUR TABLE
• This product is intended for INDOOR use only.
• DO NOT sit, climb, or lean on the table.
• DO NOT drag the table when moving it. This will damage the legs.
• To clean the hard surfaces spray a cloth with a mild cleaner and wipe.
