GLD Products
Super Shot 7
'
Hockey Table
Item 64-3012
7
1-800-225-7593
www.gldproducts.com
STEP 1 - ASSEMBLE THE TABLE
1. Lay the table top bottom side up on a flat surface. The fan should already be installed.
2. Position the side panel (#1) so the grooves on the inside surface line up with the braces.
3. Use six screws (#8) to secure the side panel.
4. Repeat steps 2 and 3 for the second side panel.
5. Position an end panel (#2) at one end of the table top. The grooves on the inside will line
up with the braces.
6. Use two screws (#8) to secure the panel.
7. Repeat steps 5 and 6 for the second end panel.
NOTE:
The side panels are not yet fully supported. Do not lean or pull on the side panels.
8. Position one of the catchers (#9) at one end of the table.
9. Use two screws (#10) to secure it to the end panel.
10.Repeat steps 8 and 9 for the second catcher.