6
Instructions for the installer
LEVELLING THE COOKER
The appliance is supplied with four plastic feet,
which must be screwed into the corners of the
oven base prior to installation. These feet are
used to level the oven and adjust its height in
relation to the surrounding cabinetry.
•
It is important that the cooker is placed on a
firm level surface and that the feet, are
adjusted to ensure that the cooker is perfectly
level. An unleveled cooker can affect the
cooking results. To level the cooker, simply adjust the feet, screwing up or down
as required.
Electrical connection
WARNING! THIS APPLIANCE MUST BE EARTHED!
Your cooker should have been checked to ensure that the voltage corresponds with
your supply voltage, this is stated on the rating label behind the flap panel.
The cooker must be connected by a qualified electrician to a suitable double pole
control unit with a minimum rating of 32A with a minimum contact clearance of 3mm
in all poles, which should be fitted adjacent to (but not above) the cooker, in
accordance with IEE regulations. The power supply cable should conform to
BS6004. We recommend P.V.C insulated
twin and earth cable with a conductor
size of 4mm
2
. The maximum size of cable that can be used is 10mm
2
.
The control unit should be easily accessible in the event of an emergency.
The appliance conforms to EN55014 regarding suppression of radio and television
interference.
