9
Instructions For The Installer
ELECTRICAL CONNECTION
The electrical connection must be carried out in accordance with the current
standards and laws in force and by a qualified electrician.
WARNING!! This appliance must be earthed.
This appliance operates from a 3 pin, 3 amp plug, supplied fitted to the appliance.
The voltage rating is 230 Volt and should be protected by a 3 amp fuse in the plug.
Should the fuse require replacement, it must be replaced with a fuse rated at 3 amp
approved to BS1362.
Should this plug not fit the socket outlet in your home it should be cut off and
replaced with a suitable plug as outlined below.
Note
: The removed plug cannot be used for any other appliance and should
therefore be properly disposed of and not left where children might find it and plug
it into a supply socket – with the obvious consequent danger.
Important:
The wires in the mains lead on this appliance are coloured in
accordance with the following code:
Green and Yellow
= Earth
Blue
= Neutral
Brown
= Live
As the colours may not correspond with the markings identifying the terminals in
your plug, proceed as follows:
•
The green and yellow wire must be connected to the terminal in the plug which
is marked with the letter E or with the earth symbol … or coloured green and
yellow.
•
The blue wire must be connected to the terminal marked with the letter N or
coloured black.
•
The brown wire must be
connected to the terminal marked
with the letter L or coloured red.