Page
12
of
15
Side Panel
Rear Panel Features
11.
DC INPUT
This is a 2.5mm barrel connector with Ve. It can accept input voltages
between 9 and 15V DC and the external power supply should provide at least x
Watts.
12.
MICROPHONE INPUTS
Two Neutrik XLRs are provided for the two microphone inputs. The inputs are
electronically balanced, rf filtered and protected against external phantom
power signals.
13.
HEADPHONE OUTPUTS
The two headphone outputs are driven from their own amplifiers. Each output is
stereo, with the currently selected microphone routed equally to the left & right
ears.
The sockets are standard 6.35mm tip ring sleeve and are suitable for connecting
to headphones with impedances of between 32 and 1000 Ohms.
14.
ANALOGUE OUTPUT
This electronically balanced audio output provides an analogue output signal of
the currently selected microphone.
DC INPUT
MICROPHONE
INPUTS
HEADPHONE
OUTPUTS
ANALOGUE
OUTPUT
