www.glentek.com
Chapter Five
MANUAL# 9675-1035-000-A
13
5.3 Safety
Serious or fatal injury can result from failure to work safely on this equipment.
Only qualified personnel should install and maintain this spindle drive.
The drive has capacitors that remain charged after the power is shutoff. Wait 5 minutes to allow
the capacitors to discharge before removing the cover or working on the drive.
Be sure the system is properly grounded before applying power.
Regenerative braking resistors can generate temperatures that ignite combustible materials
or vapors. Keep all combustible materials way from braking resistors.
Braking resistors should be shielded to prevent burn injuries.
The motor will rotate when autotuning, take precautions to prevent injury and damage
to equipment.
