PV Glider Manual v. 2 rev B www.glidebikes.com
6 of 11
To adjust the brake. Use a Phillips screwdriver to set the brake lever distance so that the
child can easily reach the lever. Figure 5
Figure 5.
Adjust the brake tension by first using the barrel adjuster on the rear of the bike. Figure 6.
Turn counter clockwise to tighten brake and clockwise to loosen. Once proper tension is set
tighten the lock nut clockwise to prevent the barrel adjuster from moving. The wheel should
spin freely but stop when lever is squeezed. When the bike is new there is a break-in period
, wait till the bike has been ridden a couple of hours then try to adjust again. If the brake is to
