25
⚠
Warning
Using a High-Pressure Water Cleaner.
Glide
does not
recommend using high pressure cleaners but does concede that on rare
occasion it may be necessary.
Before proceeding,
all Electrical components including
controllers must be removed from wheelchair before using high pressure guns. Motors
must be tightly sealed with a plastic cover and never aim gun directly at the motors or
gearbox. Never use alkaline based solvents or degreaser as they are highly corrosive.
All 4 suspension pivot points should be re greased using a Molybdenum base grease
after High Pressure Cleaning.
Packing & Shipping
The CentroGlide Power Chair is shipped to Glide Products agents on a pallet enclosed
with a cardboard box to minimise damage during transport.
Your chair should arrive to you fully assembled and ready to use.
If your chair needs to be transported interstate or overseas, it is recommended that a
shipping box and pallet be used. These can be purchased from your nearest Glide
Products agent or dealer.
NOTE: As stated in our warranty, we recommend that your wheelchair be returned to a
Glide Products agent for its free 3month safety check. This is a one off free service
calculated from date of purchase.
Summary of Contents for CentroGlide
Page 37: ...37 ...
Page 39: ...39 ...
Page 50: ...50 Dahl CentroGlide adaption kit 502237 ...
Page 64: ...64 ...