Frequently Asked Questions.
1
Gate is not opening/ closing
full
Grease the gate Hinges.
Check the stability of mounting Clamps
2
Remote control not
responding
Check for light in the remote. If mild
replace the battery on the Remote- 12v
alkaline. The life of the battery is
expected to be one year.
3
Gate not responding to
remote/ manual switch
Check Power and battery connection
and condition. Call service
4
Any maintenance required
No, except keep the hinges clean and
frequently lubricate.
5
No Response from System
This could be due to power /battery
failure or Machine damage.
Un- clutch both Motor Arm as shown in
picture above. Release the EM Lock
with the attached keys. Slowly move
both gates manually open. Call for
service
Periodic Maintenance:
Keep EM Lock / Lock Base and hinges out of dust and keep the hinges
lubricated.
Check the stability of the Motor Arm mounting Clamps.
Check the connection cables soundness.