Glide SW-400 Owner Manual And Service Booklet Download

Page: 3 / 17

INSTRUCTIONS

SITE INSPECTION

Before begin to install the Automatic System, please check following.

1. Structure of the Gate Poll should be sufficiently strong to support the

mechanism. The hinges must function efficiently and there must be no friction
between moving parts and fixed parts, other than usual.

2. Check the floor level and make sure that the gate should not rub on ground,

during opening / closing.

We offer 3 types of operators for Swing Gates.

1. Swing Gate Opener - SW 400

2. Under Ground Opener - UGS 300

3. Roller Swing gate Opener- SWR- 500

STANRARDS PACKINGS
Arm Gate Motor

- 2 Nos

Mounting Brackets

- 2 Sets

Remote transmitter

- 2 Nos

Close Hit bush

- 1 No

Control Box with control Board

- 1 No

Release Keys

- 2 Nos

OPTIONAL ITEMS:
Photocell
Flashing Light
Battery Backup
Electric Lock

Summary of Contents for SW-400


















Search results

Summary of Contents for SW-400

Reviews:

Related manuals for SW-400

Brands by name

Popular brands

Glide SW-400, Owner Manual And Service Booklet

Search results

Summary of Contents for SW-400

Reviews:

Related manuals for SW-400

Brands by name

Popular brands