background image

  ◆ Do not use battery of other brands or model, otherwise there will be safety risks.
  ◆ Do not touch the battery, do not open or pierce the shell, to avoid short circuit caused by metal objects contacting battery. Failure to do so 

may result in battery damage or personal injury.

  ◆ Charge the battery with original charger, otherwise there’s risk of damage or caught a fire.
  ◆ Improper disposal of waste batteries may seriously pollute the environment. Please comply with local regulations when discarding the 

batteries. Do not discard the batteries at will to protect the natural environment.

  ◆ After each use, fully charge the battery to extend the battery service life.
  ◆ Do not place the battery in a high temperature over 50 degree or a low temperature environment lower than -20 degree (for example: do 
not place an electric scooter or its battery unit in a car exposed to the sun in summer), and it is forbidden to put the battery pack into a fire, 
otherwise, it may cause battery failure, overheating, and even risk of fire. When not in use for more than 30 days, please fully charge it first, 
store it in a cool and dry place, and fully charge it once every 60 days, otherwise the battery may be damaged and this damage is not covered 

by the warranty.

Avoid recharging after the battery is completely depleted, and try to charge as soon as possible, which can greatly extend the service life of 

Maintenance of the battery

  ◆ It is forbidden to use high-pressure water gun to spray and wash.
  ◆ Make sure that the electric scooter is in the off state, and the charging cable has been pulled out and the rubber cover of the charging 

port has been fastened. Otherwise, electric shock or serious fault may be caused due to internal water inflow.

When the scooter is not in use, store it in a dry and cool place indoors, and avoid long-term outdoor storage. Sun exposure / over heating / 

super cooling outdoor environment will accelerate the appearance and tire aging of electric scooter and reduce the service life of electric 
scooter and its battery pack.

· 14 ·

Summary of Contents for Eagle One




























Reviews: