9
Step 2. Hold the horizontal handle bar and lift it up to its
while both wheels are
on the ground. At this point, the standing board is tilted and the folding box at the neck is
separated.
of the standing board and step
with your body weight. You should hear a click at the folding box, which means the locking pin is
inserted in its notch and the folding box should be closed.
.
Step 3. Rotate the folding release lever (A) up so it gets into the notch in the upper section of the
folding box.
Step 4. After scooter is unfolded, bring down kickstand to have the scooter stand in unfolded
position and install the handle grips on both sides of the handle bar. First use the provided Allen
wrench to loosen the bolt (B) at the bottom side of the hand brake to adjust the handbrake
position for normal operation. Make sure you tighten the bolt after you adjust the hand brake
position.
(A)
(B)
Locking pin is secured
In notch
Step with your body
weight on the side
of the board that is
close to you.
Fully Down
