13
battery.)
become
To take the scooter out of
the rack, reverse above steps.
s
SEAT,
Step 1: The seat installation has 3 components: seat, upper seat post (black) and lower seat post
(Silver). Attach the black seat post to the seat as shown in (1) with the seat post clamped to the
seat base. You may put the bolt (G) either towards front or the back of the seat, which results in
different tilt angles and positions for the seat. Tighten the bolt (G) using provided Allen wrench.
Note you can adjust the seat position and angle by loosening the bolt. Make sure you tighten the
bolt.
Step 2: Insert the upper seat post into the lower seat post at appropriate height.
posit
release lever.
(G)
(1)
(H) Grooved
Safety Line
Mark
(H)
(G)
Fitting curves for braces are not aligned
to braces when the bolt (G) is loose. As
the bolt (G) gets tightened, braces will
get into the fitting curves.
