17
1.
Turn the scooter off. The charge port
(K)
is located on the right side of the neck of the
scooter above the folding mechanism. Open the charge port rubber protective cover
and securely plug the charger into the charge port.
2.
Plug the charger into the power outlet.
3.
A solid red light on the charger indicates the battery is charging. A solid green light
indicates the battery is fully charged.
4.
Remove the plug from the power outlet, then remove the charger fr
om the scooter’s
charge port. Secure the charge port rubber protective cover.
USAGE:
1.
You will not damage the battery by riding the scooter until the battery is fully
discharged and the scooter motor shuts down. However, we do ask to promptly
recharge the battery after a full discharge. Do not store your scooter with an empty
battery.
2.
Avoid operating the scooter when the battery is hot.
DOLLY FEATURE
You must press the center button of the dolly handle to extend it from the board or retract it into
the board. When you fully retract the dolly handle into the board, make sure the handle locks into
the operating position and is secure so that it cannot be extended without first pressing the center
button on the dolly handle.
Center Button of
the Dolly Handle
(K)
