Chapter 2
Unpacking
2.1 Opening the Delivery Package
The 3301320 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2 Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The 3301320 delivery package
contains the following items:
„
3301320 Board x 1
„
ATA/100 IDE flat cable x 2
„
FDD flat cable x 1
„
Printer cable with bracket x 1
„
Two RS-232 COM Port cable with bracket x 1
„
8-pin USB split type cable with bracket x 1
„
MIC/Audio 8-pin cable + 2 phone jacks with bracket x 1
„
5-pin ATX power cable x 1
„
Utility CD Disk x 1
„
Jumper Bag x 1
„
User s Manual
5
