V i d e o
Select the type of primary video subsystem in your computer. The
BIOS usually detects the correct video type automatically. The BIOS supports
a secondary video subsystem, but you do not select it in Setup.
Halt On
During the power-on self-test (POST), the computer stops if the
BIOS detects a hardware error. You can tell the BIOS to ignore certain errors
during POST and continue the boot-up process. These are the selections:
No errors
POST does not stop for any errors.
All errors
If the BIOS detects any non-fatal error, POST stops and
prompts you to take corrective action.
All, But Keyboard
POST does not stop for a keyboard error, but stops for
all other errors.
All, But Diskette
POST does not stop for diskette drive errors, but stops
for all other errors.
All, But Disk/Key
POST does not stop for a keyboard or disk error, but
stops for all other errors.
Panel Type
Select the different panel type to run the system. Four various
resolutions for TFT type and two for DSTN.
Boot Device
This item allows you to select the different devices for boot up
function
3312400 User's Manual
23
