Global Caché
The 3 IR ports on the Tri-port cable can be used
as 3 IR emitters or 2 emitters and 1 Flex Link
Blaster cable (on IR3).To use IR3 with a Flex
Link Blaster cable, change “Blaster Connected
on IR3” from False to
True
. Then select
Save
Changes
to apply the new settings.
Troubleshooting.
See the iTach Flex Quick
Starts or visit our website for more information
on configuring Flex devices.
*To download the
iHelp
application visit
www.globalcache.com/downloads
. Run iHelp
on a Windows PC that is connected to your
network. iHelp listens for Global Caché multi-
cast beacons and displays the iTach IP address
and other details within one minute.
Global Caché, Inc.
160 East California Street
PO Box 1659
Jacksonville, Oregon 97530
Phone (541) 899-4800 - Fax (541) 899-4808
www.globalcache.com - support@globalcache.com
Copyright ©2013 Global Caché, Inc. All rights reserved.
PN: 022213-02 ver.2 Information subject to change without notice.
This device complies with Part 15 of FCC rules and with
ICES-003 of Industry Canada. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference
Made in the U.S.A.
Quickstart_FLCtriport_1up_062713.indd 2
7/1/2013 1:31:56 PM
