STEP# 4 – INSTALLING SADDLE
Tighten the quick release seat post binder bolt securely at desired height. Turning the
tension adjusting nut clockwise while keeping the cam lever from rotating increases
clamping force, turn it counterclockwise while keeping the cam lever from rotating reduces
clamping force. Less than half a turn of the tension adjusting nut can make the difference
between safe clamping force and unsafe clamping force.
Adjust angle of seat so that top of seat is parallel the ground and comfortable to the rider.
Retighten seat clamp nuts securely with an adjustable wrench.
NOTE: Especially pay attention to the insertion warning mark
NOTE: Test the seat to pedal distance by having the rider sit on the seat. When the rider‘s leg is slightly bent, the ball of
the foot should rest on the pedal when it is in its lowest position and the feet of a seated rider can reach the ground. If it
does not, adjust the seat height as necessary. Check for tightness by attempting to twist the seat. If the seat is loose, be
sure to tighten the clamp nut and binder blot nut securely.
After step 4, the Ebike has been assembled
Summary of Contents for EVOLT
Page 2: ...PARTS LIST M15 SPANNER M6 ALLEN KEY CHARGER...
Page 11: ...A B A C B D FOLD THE EBIKE...
Page 18: ......
