ADJUSTMENT INTRODUCTION
# 1 –FRONT WHEEL
NOTE: This Ebike has preassembled front and rear
wheels. Please use this information for adjustment and
future reference.
1. Turn the fork until the fork Plate points
to the front of the Bicycle. (See illustration
A)
2. Insert the wheel into the fork.
3. Install an axle nut to each side of the
axle.(see illustration B)
4. Tighten the axle nuts by hand. Make
sure there is an equal distance between
each fork tube and the wheel. Then use a
wrench and securely tighten the axle nuts.
(See illustration C & D)
REFER TO THIS INFORMATION IN CASE YOU
NEED THEM FOR FUTURE ADJUSTMENT
Summary of Contents for EVOLT
Page 2: ...PARTS LIST M15 SPANNER M6 ALLEN KEY CHARGER...
Page 11: ...A B A C B D FOLD THE EBIKE...
Page 18: ......