15
Need help or have any questions? Call us at 1-714-963-0329 or send us an Email at service@globalhobby.net
The X-Terminator Pro features front and rear gear differentials that each feature five o-ring seals and cup-style housings. Both differentials
are packed with differential grease that is good for most driving conditions.
You can make fine-tuned adjustments to each differential by removing the differentials from the chassis, opening them up and replacing
the grease already inside the differentials with heavy-weight silicone shock oil. Removal, disassembly and reinstallation of the differentials
can be done, using the exploded parts diagram included with your kit.
●
Adding heavier silicone oil will tighten the differentials and adding lighter silicone oil will loosen the differentials. If your buggy feels
loose during turns, you can tighten the front differential or loosen the rear differential. If your buggy is pushing during turns, you can
loosen the front differential or tighten the rear differential. We recommend using silicone shock oil weights between 30,000 and 100,000.
✦
✦
✦
✦
✦
WARNING
✦
✦
✦
✦
✦
We don't recommend attempting to make adjustments to the differentials unless you have knowledge of how to
remove, disassemble and reassemble gear differentials. If you don't reassemble the differentials properly, damage to the differentials
will happen quickly and will not be covered by warranty.
Step 6: Adjusting the Front and Rear Differentials
Out of the box, the X-Terminator Pro has a stiff sway bar installed. This sway bar will give good performance in most conditions. We
have included a more flexible sway bar should you want to change it.
Step 7: Changing the Rear Sway Bar
To remove the stock sway bar, first loosen the grub screws in the collars at each end of the
sway bar. Next, remove the four screws that hold the sway bar block in place, then
remove the sway bar block and pull the sway bar out. Replace the sway bar with the more
flexible one. Installation is the reverse of the disassembly procedure.
For your convenience we've included a
maintenance list, along with an extensive
troubleshooting guide on the next few pages.
If you need to purchase replacement parts for your
X-Terminator Pro, please check the information
listed on the back page of this Assembly Manual
and Tuning Guide.
