8
22" Auto Ride-On Scrubber
User Manual
4
Care and Maintenance
(cont'd)
Squeegee Rubber Blade Replacement
Battery Maintenance
1.
Remove the squeegee assembly from the unit (refer to squeegee installation instructions)
2. Unlock the spring lock and slide the blades out.
3. Replace with new blade and reassemble.
•
Always follow the battery charging directions as outlined in the
Charging the Batteries
section of this
manual.
•
Keep battery tops and terminals free from corrosion. A strong solution of baking soda and water is the
best way to keep batteries corrosion-free.
Do not allow baking soda / water solution to enter the
battery cells.
•
Use a wire brush with the baking soda solution to properly clean the battery posts and connections.
•
Check battery connections for wear and loose terminals. Replace if necessary.
Battery Disposal
•
Old batteries must be disposed in compliance with specific local regulations.
•
Never dispose of old batteries as regular waste.
Storage
•
Store the machine indoors in a dry location.
•
Always store the machine with the squeegee and pad/driver raised off the
floor.
•
Always drain the solution and recover tank fully before storing, especially
when storing in a cold
location.
