background image

 

 

 

• 

Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an 
adapter, and do not use an extension cord. 

• 

It is recommended that a separate circuit, serving only your refrigerator, be provided. 
Use receptacles that cannot be turned off by a switch or pull chain. 

• 

Never clean refrigerator parts with flammable fluids. These fumes can create a fire 
hazard or explosion. And do not store or use gasoline or other flammable vapors and 
liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard 
or explosion. 

• 

Do not connect or disconnect the electric plug when your hands are wet. 

• 

Unplug the refrigerator or disconnect the power before cleaning or servicing. Failure to 
do so can result in electrical shock or death. 

• 

Do not attempt to repair or replace any part of your refrigerator unless it is specifically 
recommended in this material. All other servicing should be referred to a qualified 
technician. 
 
 

• 

This unit is not designed to operate in enclosed spaces. When placing your unit, 
make sure you allow adequate airflow on all sides. 

• 

Use two or more people to move and install the refrigerator. Failure to do so can result in 
back or other injuries. 

• 

To ensure proper ventilation for your refrigerator, the front of the unit must be 
completely unobstructed. Choose a well-ventilated area with temperatures above 60

°

(16

°

C) and below 90

°

F (32

°

C). This unit must be installed in an area protected from the 

elements, such as wind, rain, water spray, or drips. 

• 

The refrigerator should not be located next to ovens, grills or other sources of high heat. 

• 

The refrigerator must be installed with all electrical connections in accordance with state 
and local codes. A standard electrical supply (115V AC only, 60 Hz), properly grounded 
in accordance with the National Electrical Code and local codes and ordinances, is 
required. 

• 

Do not kink or pinch the power supply cord of the refrigerator. 

• 

The fuse (or circuit breaker) size should be 15 amperes. 

• 

It is important for the refrigerator to be leveled in order to work properly. You may need 
to make several adjustments to level it. 

• 

Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners 
may damage or discolor the interior. 

• 

Do not use this apparatus for other than its intended purpose. 

 
 

Summary of Contents for SUMMIT GIDIFF946W

















Reviews: