Focus Adjustment
The focus distance of your laser upon delivery will be set to 1000mm unless requested otherwise. This
can be adjusted as follows:
1. Remove your interchangeable projection optic if one is fitted by unscrewing it from the main body of
the laser module (see drawings A&B)
2. Insert the supplied focus key into the laser barrel and align with focus control grooves
3. Turn the focus key until your desired focus is achieved
4. Replace the interchangeable pattern optic by screwing it back onto the main body of the laser
module
Changing Optics
A number of interchangeable projection optics are available as extra items for the LaserLyte-Flex. The
base laser module, normally projecting a simple dot, can then be used to project patterns such as a
cross, line, or a combined line & central dot.
To replace a projection optic:
1.Unscrew the projection optic from the main body of the laser module if one is currently fitted (see
drawings A&B)
2. Replace the interchangeable pattern optic by screwing one back onto the main body of the laser
module
3. Ensure that optics not fitted to the laser module are protected from dust or other contaminants
