Page | 8
TROUBLESHOOTING GUIDE
Before any troubleshooting commences make sure the battery has a full charge!
(1)
Does the lift raise or lower
NO
(a)
Check the battery connection and reconnect
(b)
Check hand controls, make sure they are connected properly
(c)
Check for any lose wires on the control compartment
(d)
Check the connection cable for damage
(e)
Check to see that the lock on the hand control or front control box is in
the unlocked position.
(f)
Check to see if the battery has 24+ volts using a multimeter or volt
meter
(2)
Did the lift stop moving over water and is stuck?
Yes
(a)
Have a person or attendant push the emergency return button.
(b)
The button is located on the front of the main control box or on the
underside of control box. The emergency button overrides the hand
controls in case they have failed.
(c)
If the above does not work then recheck the battery, battery
connection or the controls are not connected properly.
