Global Link Ultra ES Pro Smart Lock
Instructions
August 2021
Page 15
Restoring the Lock’s Factory Settings
The lock can be restored to the default factory settings. When the factory settings are restored:
The lock is set to the default factory default PIN and the user PIN is reset.
A notification message appears on all connected instances of Global Link Connect.
The lock is unpaired from all instances of Global Link Connect.
Note:
The lock continues to appear on the home screen in Global Link Connect. It is
recommended to remove the lock from Global Link Connect so the app no longer
attempts to connect to the lock.
To restore factory settings:
1. Use a #2 Phillips screwdriver to loosen the captive battery compartment screw on the
interior of the lock. Do not completely remove the screw.
2. Lift off the battery compartment cover.
3. Use a blunt object, such as a pen, to press and hold the Reset button (located in the
battery compartment) until the lock beeps.
4. Insert the battery door tabs in the slots on the edge of the battery compartment and swing
the door closed. Tighten the screw to secure the battery door.
Figure 12: Restoring Factory Settings
Battery compartment screw
Reset button
