Global Link Ultra ES Pro Smart Lock
Instructions
August 2021
Page 16
Installing the Lock
The Global Link Ultra ES Pro Smart Lock fits:
hole cutouts from 2 1/2" x 3 5/8" to 3" x 4"
Recommended: 2 3/4" x 3 3/4"
door thicknesses from 1 1/4" to 1 1/2" (most standard RV doors)
Note:
Installation videos can be found at cpgbrands.com.
To install the lock:
1. Remove the existing lock.
2. Position the exterior lock assembly (with keypad) on the outside of the door, ensuring the
plunger assembly is positioned at the edge of the door as shown in Figure 13.
3. Using the 2 #8-32 x 3/8” flat head screws provided, install the door edge cover on the
edge of the door. Ensure the door edge cover is flush to the edge of the door.
Figure 13: Installing the Exterior Assembly and Edge Cover