background image

5

• 

Mow across the face of slopes, never up and down.

• 

Exercise extreme caution when changing direction on 

slopes.

• 

Do not mow on slopes of more than 20°.

• 

Exercise extreme caution when pulling the lawn- mower 

towards you.

•   

Stop the blade if the lawn mower has to be tilted for 

transportation when crossing surfaces other than grass, 

and when transporting the lawn mower to and from the 

area to be mowed.

• 

 Never operate the lawn mower with defective guards, or 

without safety devices, such as the stoneguard and/or 

grass-catcher, in place.

• 

 Do not change the engine governor settings or over 

speed the engine.

• 

 On power-driven models, disengage the drive clutch 

before starting the engine.

• 

 Start the engine carefully, following the instructions 

and keeping feet well away from the blade.

• 

Do not tilt the lawn mower when starting the engine. 

Start the engine on a flat surface that is free of 

obstacles and tall grass.

• 

Do not put hands or feet near or under rotating parts. 

Keep clear of the discharge opening at all times.

• 

Never pick up or carry a lawn mower while the engine is 

running.

• 

Stop the engine and disconnect the spark plug wire:

–  Before carrying out any work underneath the cutting 

deck or before unclogging the chute;

–  Before checking, cleaning or working on lawn mower;
–  After striking a foreign object. Inspect the lawn mower 

for damage and make repairs before restarting and 

operating the lawn mower;

–  If the lawn mower starts to vibrate abnormally (find 

and remove the cause of the vibration immediately).

• 

Stop the engine:

–  Whenever you leave the lawn mower unattended. 

Remove the key from models with electric starters.

–  Before refuelling.
–  Every time you remove or replace the grass-catcher.

• 

Reduce the throttle before turning off the engine and 

turn the fuel off when you have finished mowing, 

following the instructions in the engine handbook.

• 

When mowing, always keep to a safe distance from 

the rotating blade. This distance is the length of the 

handle.

• 

Never cut grass while walking backwards. 

• 

Stop the engine before pushing mower across gravel 

drives, walks or roads.

Maintenance and storage

• 

Keep all nuts, bolts and screws tight to be sure the 

equipment is in safe working condition. Regular 

maintenance is essential for safety and performance.

• 

Never store the equipment with fuel in the tank inside 

a building where vapour may reach a flame or a spark 

or a source of extreme heat.

• 

Allow the engine to cool before storing in an enclosed 

space.

• 

To reduce the fire hazard, keep the engine, exhaust 

silencer, battery compartment and fuel storage area 

free of grass, leaves, or excessive grease. Do not leave 

containers with grass cuttings in rooms.

• 

Check the stone-guard and grass-catcher frequently for 

wear and deterioration.

• 

If the fuel tank has to be drained, this should be done 

outdoors and when the engine is cool.

• 

Wear strong work gloves when removing and 

reassembling the blade.

Summary of Contents for RL 500













Reviews: