9
the outputs of the individual units. In this situation; however, care
must be taken that the voltage of neither of the terminals, with
UHVSHFWWRWKHFKDVVLV*1'H[FHHGWKHJURXQGSURRIYROWDJHRI
+180 V.
1.2.1
6,1*/(92/7$*(&211(&7,21
For connection as shown in Figure 3, the output voltage will be the
sum of individual supplies and output current will be limited to within
WKHYDOXHVSHFL¿HGIRUDVLQJOHXQLWZKLFKHYHULVORZHU)RUSRVLWLYH
ground terminal to output positive point and for negative ground
system, connect the ground terminal to the negative output point.
1.2.2
3/860,186&211(&7,21
For connection as shown in Figure 4 where the intermediate point is
KRRNHGXSWRJURXQGWKHFRQ¿JXUDWLRQFDQEHXVHGDV3OXV0LQXV
power supply.
Figure 3
Figure 4
www.
.com
information@itm.com
1.800.561.8187
