Global Specialties
Safety
To avoid personal injury and/or product damage, review and comply with
the following safety precautions. These precautions apply to both operating
and maintenance personnel and must be followed during all phases of
operation, service, and repair of this meter.
Dry Conditions
Hands, shoes, floor, and work bench must be dry. Avoid making
measurements with dampness, or other environmental conditions that might
affect safety.
Cleaning
Use a soft cotton cloth lightly moistened with a mild solution of detergent
and water. Do not allow any portion to be submerged at any time. Dry
thoroughly before attempting to make measurements. Do not use solvents
or expose to solvent fumes as they may cause deterioration or damage
Do not operate:
In the presence of noxious, corrosive, flammable fumes, gases,
vapors, chemicals, or finely-divided particulates.
In environments where there is a danger of any liquid being spilled
on the meter.
In air temperatures exceeding the specified operating temperatures
In atmospheric pressures outside the specified altitude limits or
where the surrounding gas is not air.
Compliance and Certifications
CE Compliance
This product meets the essential requirements of the applicable European
Directives as follows:
•
89/336 Electromagnetic Directive (EMC)
•
2011/65/EU: Restriction of Hazardous Substances Directive (RoHS)
2
