28
Note: If the PB-507 Trainer was previously unsecured, loading the default
configuration will secure the device with the last saved security code.
7.2 Memory menu
The
Table 4
shows the Memory menu.
First level
Second level Third level
Description
Back
Go
Back
to the PB-507 main
menu
Store state
Back
Go
Back
to the first level
The states
numbered
from 1 to 10
Back
Go
Back
to the second level
Enter name
Select this option to Enter a
name for the selected state.
Save state
Select this option to save the
selected state
Recall state
Back
Go
Back
to the first level
The states
numbered
from 1 to 10
Recall the selected state
Delete state
Back
Go
Back
to the first level
Delete all
Select
Delete all
to delete all
states
The states
numbered
from 1 to 10
Delete the selected state
Table 4
7.2.1 State storage
The PB-507 Trainer has ten storage locations in non-volatile memory to store
states. The locations are numbered from 1 to 10.
You can store a state in any of the ten storage locations, but you can only recall
a state from a location that contains a stored state. “Empty location.” message
will appear if you try to recall a state from a location that not contains a saved
state.
The storage locations are not affected by the
Load default configuration
command. Once a state is stored, it remains until it is overwritten or specifically
deleted. You can delete all the states at once by selecting
Delete state
Delete all
option.
To save the current state, go into
Store state
menu, select a location from 1 to
10, and select
Save state
option from the menu. The message “State stored.”
will appear.
