53
; NFS mounts, should be listed in /etc/fstab
MOUNTS=""
; For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
; Extra stuff to do after setting up the interface
start_fn () { return; }
; Extra stuff to do before shutting down the interface
stop_fn () { return; }
13)
Restart pcmcia-cs with the command
# ln -s /etc/rc.d/init.d/pcmcia pcmcia
# ./pcmcia restart
14)
Insert the card.
A solid LED indicates that the SSID you specified was found,a bss was joined,
and the firmware completed the authenticate and associate processes.
15)
Run ifconfig and route to determine
if the device WLAN0 is includes and your IP and route settings are listed as you wanted
them.It's also a good idea to look at the file /etc/resolv.conf to see if your nameserver address
has been set up correctly.
