12
ASSEMBLY AND USER GUIDE
PORTABLE DEIONIZED WATER SYSTEM
Please note:
ensure to align the white housing bracket’s opening with the black housing bracket’s
female thread (See Fig. 6.4). If it is not aligned when the bolts and nuts are installed, a clear gap can
be observed between the two brackets. (See Fig. 6.5)
7. Seat
gaskets into “IN” and “OUT”
connections, then screw
hose adapters into “IN” and “OUT”
connec-
tions. (See Fig. 7.1)
Fig. 7.1
- Seat gaskets inside the “IN” and
“OUT” connections
Fig. 6.5
- If the brackets are not aligned during
installation, an obvious gap can be observed
between brackets
gap
Fig. 6.4
- Align the white bracket opening
with black housing bracket’s female thread
Fig. 7.2
– Screw hose adapters into the "IN"
and "OUT" connections
