Instruction Manual
8
Outdoor Pedestal Drinking Fountain
Install Shut-off Valve
(Not Included)
FIG. 1
3/8” O.D. TUBE CONNECT
COLD WATER SUPPLY
B
C
A
SIMPLY PUSH IN
TUBE TO ATTACH
TUBE IS SECURED
IN POSITION
PUSH IN COLLET
TO RELEASE TUBE
SIMPLY PUSH IN
TUBE TO ATTACH
TUBE IS SECURED
IN POSITION
PUSH IN COLLET
TO RELEASE TUBE
A
B
C
FIG. 2
PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO
RELEASE TUBE
OPERATION OF QUICK CONNECT FITTINGS
NOTE: WATERFLOW DIRECTION
•
If drinking fountain is being installed in areas where cold temperatures may occur, all water
inlet lines are preinstalled with pipe insulation to help prevent freezing.
•
Installation of a trap on the water drain line may be necessary; check local codes.
Always remove trap before winterization draining.
CAUTION: Before freezing temperatures occur, see Draining and Winterization section
of this manual (page 11) for proper preparation.
P4: Straight Flow Check Valve:
All Water Inlet Connec�ons:
Push Button
Bubbler
Inlet Adapter and
Straight Flow Check Valve
