USER MANUAL
BEAT-MV/BEAT-2
Edition: January 2016
Revision: No. 1
INTRODUCTION
-
5
CHAPTER 1: INTRODUCTION
1.1
GENERAL
The electrofusion units
BEAT-MV
and
BEAT-2
are designed to carry out polyethylene
(PE) or polypropylene (PP) pipe/fittings joints through electrofusion fittings with a range
of 8 V to 48 V electrofusion voltage.
This
User Manual
corresponds to the following models:
BEAT-MV
Electrofusion unit which the electrofusion parameters are entered
manually. No traceability.
BEAT-2
Electrofusion unit that the electrofusion parameters can be entered
manually or by barcode system. No traceability.
The
BEAT-MV
electrofusion unit receives the relevant data of the fitting via operator’s
manual introduction: VOLTAGE and TIME from the fitting manufacturer. Take into account
that some fitting manufacturers provide different fusion times according to ambient
temperature. Refer to the fitting manufacturer’s instructions.
The
BEAT-2,
in addition of the data manual input is also able to enter the electrofusion
parameters by means of a barcode automatic recognition system.
These models can be optionally supplied as
AR
Series (High Performance) with the same
original technical specifications, except for having a higher duty cycle. The
AR
series is
especially indicated for ongoing electrofusion of large size fittings and for very hot
climates.
The technical data contained in this
Manual
are purely informative and may be changed
at anytime. ACUSTER GLOBAL, S.L. declines all responsibility for claims arising from
misuse of the data contained herewith and/or errors or omissions detected after
publication.
This
Manual
must be considered as part of the unit.