32
EN
Fig. 14
ANTI-GREASE FILTER
The hood is equipped with an aluminium filter which partially traps grease particles. You can
wash the filter manually by immersing it for 15 minutes in 40-50ºC water with dishwashing liquid.
After 15 minutes, wash and rinse the filter thoroughly. Dry well before placing it back in the hood.
You can also wash it in a dishwasher. After cleaning, you may notice a slight discolouration of
the filter, which does not affect its properties. A regularly cleaned filter will help to maintain the
efficiency of the hood and prevent the risk of fire.
SETTINGS
• pressing the button turns the hood turbine off
• pressing the button turns the hood turbine on at minimum speed
• pressing the button turns the hood turbine on at medium speed
• pressing the button turns the hood turbine on at maximum speed
• pressing the button turns the lighting on. Pressing the button again turns the lighting off.
IN CASE OF PROBLEMS
The range hood does not function at all:
• Check whether the fuse in the domestic installation is not pulled out.
• Check if the thermal cutout of the motor has not been activated due to high temperature. If
this is the case, switch off the device and wait for about 20 - 30 minutes until the temperature
returns to normal; then switch the hood on again.
• Make sure that the plug is inserted in the socket.
• Remove the plug to restart the device. Wait for about 15 - 20 seconds and then plug it back in.
Alternatively, you can also pull out the fuse for that time and then put it back in.
2
1
0
4
3
2
1
4
3
0
Summary of Contents for 5900652387823
