32
EN
1
2
4
3
5
6
LED display
The selected speed level (1,2,3,4) will be shown on the display .
Speed adjustment
Pressing the minus „
–
” button will decrease the speed of the turbine.
Pressing the plus „
+
” button swill increase it.
Switching the hood motor on and off
The hood motor can be started in 3 ways:
1. Pressing the button - the motor will switch on at the same speed level at which it was
switched off.
2. Pressing the minus „
–
” button - the motor will switch on at the minimum speed level.
3. Pressing the plus „
+
” button - the motor will switch on at the maximum speed level.
Switching the lighting on and off
To turn the hood lighting on, press . Pressing the button again turns the lighting off.
2
3
2
4
1
4
5
ANTI-GREASE FILTER
The hood is equipped with an aluminium filter which partially traps grease particles. You can
wash the filter manually by immersing it for 15 minutes in 40-50ºC water with dishwashing liquid.
After 15 minutes, wash and rinse the filter thoroughly. Dry well before placing it back in the hood.
You can also wash it in a dishwasher. After cleaning, you may notice a slight discolouration of
the filter, which does not affect its properties. A regularly cleaned filter will help to maintain the
efficiency of the hood and prevent the risk of fire.
SETTINGS (BUTTONS ON THE HOOD OR REMOTE CONTROL)
Summary of Contents for Alario 60
Page 12: ...12 PL 6 Zamontuj filtr przeciwt uszczowy 7 Pod cz rur do kr ca silnika Rys 11 Rys 12...
Page 30: ...30 EN 6 Install the grease filter 7 Connect the duct to the motor connection Fig 11 Fig 12...
Page 48: ...48 DE 6 Den Fettfilter einsetzen 7 Verbinden Sie das Rohr mit dem Motorstutzen Abb 11 Abb 12...
