35
EN
Before connecting the service, please take down the following details of your device:
Type:
___________________
Seria-Nr:
___________________
You can find this information on the identification plate. The plate is located inside the hood and
is visible after removing the metal filters.
The identification plate shown in the figure above is only an example. The data may differ for
other models.
To request a hood repair, you can use the form available at https://globalo.pl/serwis/.
Type
LOTEO 60
Motor power
200 W
Lighting power
5 W
Total power
205 W
Supply Voltage /
frequency
220-240V/50Hz
Outlet diameter
Ø15 cm
Seria-Nr
7350001
GLOBALO MAX
Ul. Maków 10
38-500 Sanok
TROUBLESHOOTING
Problem
Possible reason
Solution
When the hood is operating, a flashing „F”
appears on the display*.
After 35 hours of operation, the display
indicates that the anti-grease filter needs
to be cleaned or replaced.
Press and hold down for approx.
6s the „-” button on the panel. Clean the
filter or replace it with a new one.
The display only shows
the „-.” sign (minus and dot in the lower
right corner), the hood does not start
when switched on*.
The touch panel is locked (this is a
function used to facilitate cleaning of
the hood).
To deactivate the lock, press and hold the
on/off sign for approx. 10s.
No sign appears on the display, the hood
does not respond to the buttons*.
The control panel may be frozen.
Disconnect the hood from the power
supply for approx. 15 seconds and then
switch it on again.
The display shows the sign of one of the
speed levels and the hood does not react
to the buttons*.
The control panel may be frozen.
Disconnect the hood from the power
supply for approx. 15 seconds and then
switch it on again.
The hood turbine switches off after
15min. of operation and the display blinks
with, for instance „1” (the number of the
current speed level and a dot in the lower
right corner of the display*.
The automatic timer of the control panel
has been activated.
To deactivate the timer, press the plus
sign for about 10 seconds or switch off
the device.
