background image

 

9.  SAFETY AND LEGAL NOTICES 

Please read this section carefully before using the GPS receiver 

Globalsat Technology Corporation / USGlobalsat, Inc. will not accept any responsibility 
whatsoever for accidents resulting from failure to observe common sense precautions.  Your 
personal judgment, traffic regulations, and common sense must always take precedence over 
any directions produced by GPS receiver or the mapping software  

WARNING: Make sure that the GPS receiver is secure and does not interfere with driving 
visibility and safety. 

It is your responsibility as the vehicle operator to securely place the GPS unit and antenna so that they 
will not interfere with driving and prevent operations of any safety device (such as the Airbag) in your 
vehicle.  Do not mount the devices in a place where the driver or passengers may receive injury during 
vehicle operation or collision.  For your safety, take care to route all cables away from shifters, pedals, 
accessory controls and mechanisms.

 

WARNING: Drive safely and use common sense. 

It is your responsibility as the vehicle operator to drive safely, observe all traffic rules and above all use 
your own personal judgment while driving.  If you feel that a route suggested by the navigation software 
instructs you to perform an unsafe or illegal maneuver, places you in an unsafe situation, or routes you 
into an area which you consider unsafe, do not follow the instructions.  

WARNING: Keep your eyes on the road. 

It is your responsibility as the vehicle operator to keep your eyes on the road and be an alert driver at all 
times, especially when the vehicle is moving.  The vehicle’s operator should not be distracted by the 
navigation equipment or software.  Should there be a distraction with the ability to drive responsibly, 
please turn off the device.  Should you want to look at the display for a prolonged time, park the car 
safely, while following all traffic regulations before looking at the display. 

WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or 
moisture.  Do not remove covers or open housings, there are no user serviceable parts inside.  
Refer servicing to qualified personnel only.   

Summary of Contents for BR-355S4
















Reviews: