TR-151SP
page 36
6.3 Cell ID Report Format
Format of GPRS report with Cell ID from TR-151SP
GSM Cell ID is assisted information to get device location. When TR-151SP does not get
GPS fix, you could enable TR-151SP to report the Cell ID.
Note:
If you want TR-151SP to report the Cell ID, please configure TR-151SP by SMS with the
content “?7,IMEI,C,Enable/disable _Cell_ID,Report_Phone_Number!” or by GPRS with the
content “$7,IMEI,C,Enable/disable _Cell_ID,Report_Phone_Number!
For details, please refer to
1.2 Write Configuration
Format:
Command_HeadIMEI,status,GPS_fix, date,time,
“MCC1,MNC1,LAC1,CID1,BSIC1,RSSI1”,
“MCC2,MNC2,LAC2,CID2,BSIC2,RSSI2”, “MCC3,MNC3,LAC3,CID3,BSIC3,RSSI3”,…
Command_End
The number of set of cell information depends on GSM network environment.
The maximum number is 5.
Format
Value
Note
Command_Head
$
IMEI
(The number of IMEI)
Status
2
5
8
9
10
11
14
16
17
21
22
23
24
2: Stop connect
5: SOS
8: Immediate report
9: Period report
10.stop and connect
11.Geofence
14.Battery low
16: Motion report
17: Motion report(position)
21:
SMS/GPRS Immediate report
22:
SMS/GPRS period report
23:
SMS/GPRS Geofence
24: Motion (Act)
GPS_fix
1
2
3
4
1: Fix not available
2: GPS 2D Fix
3: GPS 3D Fix
4: Cell ID